Excel EX 200
The new EX 200 redefines the standard in PREMIER aluminum bass boats. Precision welds, painstakingly formed gunwales and an exceptional gloss paint finish give the resemblance of a high-end fiberglass boat. Top-end speed, smooth and responsive handling, and jolting holes shots from the EX 200’s superiorly designed pad hull provide the performance of a high-end fiberglass boat.
| Length | 20′ |
| Aprox. Overall Length with Engine (varies with engine) | 25′ 2″ |
| Aprox. Overall Length with Engine and Swing Out Tongue Deployed | 23′ 3″ |
| Bottom | 68″ |
| Side Height | 22″ |
| Total Height Bottom to Windshield Top | 44.5″ |
| Transom Height | 21″ |
| Transom Dead-rise | 14 degree |
| Center Pad Width | 12″ |
| Beam | 95″ |
| Fuel | 34 gallon |
| Insulated Step Ice Chest | 10 gallon |
| Aft Live well | 22 gallon |
| Max Horsepower | 200 |
| Rod Box (Center) | Rods X 10 (8′) |
| Rod Box (Port) | Rods X 6 (7.5′) |
| Hull Thickness | 0.125 5052 -H32 Alloy |
| Persons and Gear | 4/850 lb. |
| Max Weight (Motor – Person – Gear) | 1720 lb. |
| Rigged Weight (minus engine, batteries and liquids) | 1990 lb. |
- Bay Star Hydraulic Steering with Convenient Motor Tilt and Trim Arm
- 0.125 5052 All Welded Pad Lift Hull
- Marine Grade Closed Foam Flotation
- Fiberglass Console w/Horn and Lighting
- Dash Panel with Tach, Trim, Fuel & Water PSI
- Humminbird Helix 5 Chirp DI/GPS G2
- Dash Panel Holds Up to 10″ Electronics (9″ Lowrance or 10″ Humminbird)
- Bow Panel Holds up to 10″ Electronics (9″ Lowrance or 10″ Humminbird)
- Minn Kota Maxxum 70lb 42″ Trolling Motor
- Custom Tinted Windshield
- Toggle Switches and Breaker Reset Panel
- 12 Volt and USB Plugs
- Center Rod Box Holds 10 Rods 8 foot
- Port Side Rod Box Holds 6 Rods 7.5 foot
- Twin Aft White .250″ Fiberglass Reinforced Storage Bins
- Insulated Step Insulated Cooler with Syntec Non Slip Pad
- 34 Gallon Fuel Tank
- Bucket Helm and Passenger with Fold Down Center Seat
- Driver Seat Adjustable Slide
- 1- Butt Seat W/Adjustable Seat Pole
- 1- Rear Fold Down Seat 13″ Pole
- Weather Tight Storage Boxes with Compression Gasket Lids
- Integrated Cup Holder Driver, Passenger and Bow
- Tool Holder Between Seats and Aluminum Measure Strip
- Flush Mount Bow Controls
- Lockable Front Deck and Rod Storage
- Auto Bilge Pump
- Fiberglass Live well w/HIgh Speed Pick Up, Timer, Aerator and Recir Pump
- 3 Bank Onboard Battery Charger
- Convenient Splash Well Located Charging Port
- Perko On/Off Switch
- Passenger Grab Handle
- Three Floor Drains
- Helm and Passenger Adjustable Foot Rest
- Nav Lights Bow and Stern
- Syntec Brand DeckingPad on the Center Rod Box, Step and Foot Rests
- Inside T-Slot Accessory Gunwale Rail (crappie and other fisherman will love this ability to mount rod holders and accessories to the inside of the top rail)
- Trailer
- C Channel Frame for Ultimate Corrosion Resistance
- Black w/Armor Coating
- Vortex 3500 Axle w/14″ Wheels
- Back Lit Excel Laser Cut Steps
- Deluxe Covered Winch w/Stoltz Roller
- LED Tail Lights w/Backup Light and 7 Way Plug
- Swing Away Jack w/Deluxe Oversized Wheel
- Vinyl Wrap Bunks
[/vc_tta_section]
- Mercury, Yamaha, Suzuki. Evinrude and Honda Engines
- Minn Kota and Garmin Trolling Motors – order any model
- Humminbird and Garmin Electronics – order any model
- Garmin Panoptix Livescope
- Fishing Specialties Panoptix Boat Mount
- Front Deck Large Electronics Mount
- Tandem EZ Loader or Diamond City Trailers (more details)
- Boat Storage/Travel Cover w/Tie Downs
- Shrink Wrap Reusable White Plastic Cover
- Hot Foot Throttle
[/vc_tta_section]
When we say our Excel boats have all the right features, in all the right places, we mean it. In addition to the lockable rod lockers, dry storage, and insulated step cooler, the exceptionally wide foredeck of the EX200 comes equipped with an integrated bow shroud that houses a recessed foot pedal and a cup/tool holder.
The bow shroud has a place for flush-mount electronics with the option to accommodate larger screen graphs with our optional mounts. The bow shroud also has a plug for the trolling motor and switches for navigation lights and main motor trim. The bow cap has an integrated trolling motor mount built into the boat. And to top it off, we have incorporated two 2″ conduits that run from the console to the bow cap for wiring, network cables, and NEMA 2000 systems.
The EX200 may be ordered with a single or dual console. The EX200 console incorporates market-leading ergonomic design. The driver’s console features the following gauges: speedometer, tachometer, trim, water pressure, and fuel.
This console comes with standard hydraulic steering with a tilt helm (with the options of single & dual paddle trims – engine & hydraulic jack plate), switch & reset breaker panels, and room for up to 10” flush-mount electronics.
The driver’s custom bucket seat is adjustable and the motor controls are recessed for maximum comfort. The driver’s console also comes standard with an adjustable footrest equipped with a Syntec Reflex foam pad with a laser etched EX200 logo. The optional passenger console comes equipped with a watertight and lockable glove box. Both consoles come equipped with a tinted sport windshield, USB, and 12V plugs. Two cup-holders & a tool holder is placed conveniently in between both consoles and easily accessible from the driver & passenger seats.
[/vc_tta_section]
- Trailer Options
- Tandem Axle
- Aluminum Frame
- Aluminum Tandem Axle
- Single Axle Disk Brake
- Alloy Matching Spare
- Swing Away Tongue
- Built in Ratchet Tie Downs
- Front Bow Access Steps
- Side Mid Deck Trailer Access Step
[/vc_tta_section][/vc_tta_tabs]
